Undead Sleds / Rat Rods Rule - Hot Rods, Rat Rods, Sleepers, Beaters & Bikes... since 2007!

Go Back   Undead Sleds / Rat Rods Rule - Hot Rods, Rat Rods, Sleepers, Beaters & Bikes... since 2007! > Flatheads: 4 - 6 - 8 - 12 bangers!

Flatheads: 4 - 6 - 8 - 12 bangers! Flattie Talk - Q&A! Dude... that's a funny lookin' engine!

Reply
 
Thread Tools Display Modes
  #1  
Old 04-13-2021, 09:30 PM
MercuryMac's Avatar
MercuryMac MercuryMac is offline
Builder Junky!
 
Join Date: Jan 2013
Location: Northern Alberta, Canada.
Posts: 3,989
Default Chrysler flathead

Here's my Flathead six Chrysler. This one is the industrial 230 ci. with the short 23 1/2" head. I think the different lengths of the head just mean that Chrysler didn't have to Siamese as many cylinders not that they necessarily made larger cylinders, on the longer ones. There were some bigger displacement ones though. I'm supposed to run it at 1500 revs at high idle in this 1954 Massey-Harris 33 tractor.
Attached Images
File Type: jpg IMG_2703.jpg (109.8 KB, 21 views)
File Type: jpg IMG_2707.jpg (109.8 KB, 22 views)
File Type: jpg IMG_2727.jpg (130.2 KB, 22 views)
Reply With Quote
  #2  
Old 04-14-2021, 12:29 AM
dutch dutch is offline
Rusty Rat Rodder
 
Join Date: Nov 2015
Posts: 2,287
Default

well, that looks somewhat different from the boat anchor you started with nice
__________________
He who dies with the most toys wins
Reply With Quote
  #3  
Old 04-15-2021, 05:11 PM
Neto Neto is offline
Rusty Rat Rodder
 
Join Date: May 2012
Location: Holmes Co, Ohio
Posts: 377
Default

That is very interesting, because the 23 1/2" L-head is the Plymouth engine. (I have a '55 model 230 in my 46 Plymouth.) The interesting thing is the completely different bell-housing that puts the starter on the left side, the different intake-exhaust manifolds, up-draft carb, and the blocked off fuel pump location (sort of behind what ever that deal is on the front right side).
Reply With Quote
  #4  
Old 04-15-2021, 11:08 PM
MercuryMac's Avatar
MercuryMac MercuryMac is offline
Builder Junky!
 
Join Date: Jan 2013
Location: Northern Alberta, Canada.
Posts: 3,989
Default

There are quite a lot of different bellhousings for Chrysler sixes, Neto. This is a combine motor so it had a different bellhousing that I couldn't use, I had to find a tractor one.
That's the governor at the right front and the controlling arms.
Reply With Quote
  #5  
Old 04-16-2021, 06:32 AM
Neto Neto is offline
Rusty Rat Rodder
 
Join Date: May 2012
Location: Holmes Co, Ohio
Posts: 377
Default

Quote:
Originally Posted by MercuryMac View Post
There are quite a lot of different bellhousings for Chrysler sixes, Neto. This is a combine motor so it had a different bellhousing that I couldn't use, I had to find a tractor one.
That's the governor at the right front and the controlling arms.
I've heard a lot about the use of these MoPar engines in forklifts and in farm equipment over the years, but the only industrial engine I've ever seen "in real life" was one on an irrigation set up in Nebraska, might have been any time between 74 to 80 or so. I don't recall what it had at the back, for a bell housing. Seen them in lots of cars, pickups, and trucks, but that's it. (Maybe I have actually seen one in a tractor, as I've been around a lot of old tractors over the years, but just didn't recognize it.)
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 04:03 AM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2021, vBulletin Solutions, Inc.
Rat Rods Rule Inc.